Uncategorized

Sew Ottawa! Sew-a-long Week 3

Week 3 is already here and you guys are doing so great, I love seeing all your creations every week, the quilts you all create are going to be so stunning and all so different.

How did everyone get along with the new method for constructing your half square triangles? Tania did a great job explaining it didn’t she 🙂

Congratulations to Melanie for winning last weeks prize, generously donated by the Ottawa Sewing Centre!  This weeks prize will be a Fat Quarter bundle of some cute fabrics!

If you are new here (Hi!!) check out here for the starting method to construct an HST or week 2 here to see how to construct them in bulk. If you have any questions don’t hesitate to send one of us a message or post on the facebook page.

I have been finding that an image of the finished block helps me in picking my fabrics and colours so lets start there. This block can be a little tricky to lay out so I have left some space in between the squares so you can easily see how each piece should be laid out.

SO W3

You will need 16 3″ HSTs to complete your 10.5″ block, you are welcome to use whichever method you find easiest. If you have directional fabrics that you would like to keep going in the right direction I do recommend the individual method versus doing them in bulk.

I am not worried about the direction of my fabrics so I have here 2 solid 7″ squares and 2 7″ contrasting prints.

 

 

Press all 16 blocks open with the seam to the dark side and lay out your block as shown above. We have had lots of questions about getting points to line up, the best advice I have for this is to pin, sometimes if I am really struggling with something I will pin immediately before and immediately after the seam to stop any shifting. I find when I need something to be really precise in quilting I like to use pins instead of clips.

Here is our finished block for this week, she’s a pretty one! I can’t wait to see what you all do this week!

SO W3-2

 

Much Love,

C

 

 

Uncategorized

Sew-a-long Week 2!

We survived the first week, lots of learning all around and you guys came up with some seriously beautiful blocks, I am so amazed at all the beautiful colours you chose! There were 15 blocks submitted and Stephanie Plant was the winner of the teacup pincushion!

Tania has a gorgeous block for us this week and I am so excited to see what you all create! We have an awesome sponsor and a super cute prize! Don’t forget to put #sewottawaweek2 on your block posts so we can easily find them!

Here is Tania’s blog post or you can just head over to her lovely blog 🙂

Much Love,

C

———————————————————————————————

Sew Ottawa! HST Week 2 [HST Sew-a-long 2018 3/18]

And we are out of the gate!

Everyone is off to a smashing start with their first blocks. I truly enjoyed seeing each completed block from Week 1. I’m loving your fabric choices and your blocks are gorgeous! Thanks so much for your feedback as we walk through this together. Keep it coming. For those of you not in our local Facebook Group, Colleen of Sewing for Sawyer kindly summarized some extra thoughts here.

Week 2 Sponsor!

We (the Ottawa Sewing Community) are so spoiled with amazing resources, businesses and talent. One local business that should be on your radar is The Ottawa Sewing Centre. They have kindly agreed to be our HST Week 2 Sponsor and have kindly donated a cute tin packed with Beissel sewing machine and serger needles. The Ottawa Sewing Centre is owned by Yasmin and her husband Zuher. They are Brother, Babylock and Juki dealers, Zuher is a fully trained technician and together they stock some brilliant supplies. I personally like to pick up my essentials here and have also purchased a serger from Yasmin. In my opinion, they are very knowledgeable and their customer service is fantastic!

So let’s get started on Block #2!

As you know, each week we will work through a new block design. This week we will make a 10.5″ Chevron block.

(Colleen – so sorry in advance for these “amazing” photos!)
There are many different ways to make half square triangle squares to construct your block. Colleen demonstrated an excellent method in Week 1. If you have directional patterns on your fabric, or if you have already pre-cut all of your squares – continue using the method outlined in Week 1.

Cut your Fabric

I am going to walk through a slightly different way to create your HST squares, 8 at a time. Our goal is to create sixteen, 3″ HST squares to complete our chevron block. To do so, start with two 7″ main squares and two 7″ contrasting squares. This will give you enough HST squares to create the block. In my case, I wanted to use 3 types of contrasting fabric in this block as a design element. As a result, I was left with 8 extra HST squares that I will use in another block.

Prepare your squares

Place one main and one contrasting 7″ square right sides together (rst) and pin in place. I am using a “Quilter’s Magic Wand” to draw on my sew-lines 1/4″ on either side of the square’s diagonals (optional method).

Sew along your traced sew-lines.

*After I drew the two sew-lines above, I went ahead and drew in a third middle line in the photos below. That third middle line will be your cut line. Sew only on the two outside parallel lines as created by your “magic quilter’s wand” (I feel ridiculous even typing that out).*
 

If You Do Not Have a Magic Wand

If you do not have a “magic wand”, or if this method isn’t for you, follow Colleen’s method as described in her blog post here. For ease of reference, here are her detailed instructions:
“Using a ruler and a pencil… you will want to line your ruler up from one tip of the square to the other tip as seen in the below image.
To make sure nothing shifts you can pin the block but stay away from the line as you are going to be sewing on both sides of that line in just a moment.
26237786_10155837426300281_1618384864_o
IMG_2112 copy.jpg
Using your sewing machine you are going to want to sew 1/4″ down either side of the line – shown here in black thread – the line is shown in pink pen so you can see where you are needing to sew.

Mark your Mid-Points

In preparation of cutting out your 8 HST squares, find the mid-points of each sides of your square (see tiny blue hash marks on each side of my square)

Draw a line connecting these mid-points. The blue lines below show your cut lines.

Cut out your HST Squares

I suggest cutting your square into 4 squares first. I find it’s easy as your corner-to-corner cuts are reinforced by your straight-stitches.
Boom! 8 HST squares magically appear!

Square up and Press

Ok, it’s not magic, you still need to square up your squares and press them. Quilting is like baking – there are many different ways to accomplish the same thing. I was taught the way Colleen demonstrated in Week 1; however Jan Kittle, the owner of the Pickle Dish, showed me how to square up before pressing and I love it. For me, this has given me more consistent results. You decide for you!
I’m using this “Quilt in a Day” HST ruler to square up my blocks, however I’ll show below how you can use your regular acrylic ruler that you likely already have.
Since we are making 3″ HST Squares, place the 3″ line of the ruler along the straight stitch that you’ve created. Trim the square by running your rotary cutter from the straight edge of the ruler through past the corner. Try not to start at the corner or you run risk of dulling your blade, damaging the ruler or your fingers. Once trimmed up, go back and trim the corners off at 60 degrees (or you can do this after pressing like Colleen demonstrated.
You do not need this nifty ruler to trim your blocks like this. Blogger Katy of Lethargic Lass, kindly pointed out that you can use your regular ruler and a piece of tape (obviously!). I like this little gadget, but also, I’d love less “things cluttering up my work station”, so just use some dang tape! To show you what I mean, I’ve stacked my nifty ruler over top of my regular ruler. If you look closely, the 3″ line of the nifty ruler, of course lines up with the 3″ marks on either side of the corner on my regular ruler. Slap some tape on the underside and continue with this method if you’re keen.
Now that your 16 HST squares are squared off, go ahead and press them open to the dark side.

Design your block

This is the fun/stressful part! Arrange your squares to recreate the chevrons. I am not great at the design aspect. I often will ask for the opinions of my quilty friends as I like asymmetry but also balance and I never know how to get myself there. Pop on over to our local Facebook group if you get stuck, or have had too much wine, or would just like some feedback.

Construct your Block

Sew your rows together as Colleen demonstrated in week 1. Press your Seam allowances to the left for odd rows and to the right for even rows.
Sew your rows together and press.

Share your creation!

Congratulations! You have completed your second, HST block! I just love how this simple technique can create so many different looks. Please remember to share your completed block, ask any questions and share any tips in our local Facebook group! Everyone who completes a block gains an entry into a draw to win this cute tin, packed with Beissel needles. This prize has been kindly donated by our Sponsor, The Ottawa Sewing Centre.

Week 3

Join us next week as Colleen of Sewing for Sawyer walks us through our 3rd block!
Best,
T.

 

Uncategorized

Supplies

I have had a number of messages recently about what tools I use when quilting so I thought I would do a really quick post about my go to items.

SO 3-2

 

Item #1 – Cutting mat. I got this one from Michaels using the 50% off coupon. Most of the local fabric stores and quilting shops carry them as well and have been having great sales lately. I have a 24’x36′ one but unless you are cutting a lot of large items you can definitely get by with a smaller one. This picture is also making me realize my mat needs a good cleaning….

Item #2 – 24″ x 6″ Plexiglass ruler. I am pretty sure I grabbed this one from Michaels as well with a sale coupon. This gets used all the time here and it’s the ruler I most recommend for anyone looking to get their first ruler.

Item #3 – Gypsy Grip. I just got this as a Christmas gift from a sweet friend. She scooped it from Mad About Patchwork. I love it but I do find that since my basement is cold it comes off the ruler frequently. The only work around that I have found is actually having water in the suction things – not a little water, like, I poured water onto them put the ruler on top, flipped it and then locked the clips and it seems to be working. I find it gives good leverage when I am cutting and stops my ruler from slipping when I am cutting.

Item #4 – 6.5″ x 6.5″ ruler – I love this little ruler, it’s the perfect size for so many things and I am loving it for the sew-a-long project when we are squaring up all the little squares. I don’t remember where I got this one but I’m pretty sure it was scooped from a local quilt shop a number of years ago. I see them all the time so they are easily found.

Item #5 – Ever Sewn Mini Gripper – I just scooped this from Fabric Crush and I am loving it. It makes keeping my little ruler from slipping so much easier and I love having the little handle on my ruler.

Item #6 – Rotary cutter – I have gone through a number of rotary cutters just trying to find one I love and this is my favourite. I definitely recommend trying a few different ones before purchasing if it’s possible. Everyone seems to like different ones so you need to find what works best for you. A rotary cutter will make your life so much easier for cutting fabric, it is truly worth the investment. This is the Olfa 45mm one and I am pretty sure I got it from Michaels with the 50% off coupon but they are really reasonable at most fabric stores.

Item #7 – Wonder Clips – I love my wonder clips, the multi coloured ones are from Amazon, I also have the purple ones that are an amazing price but they take FOREVER to arrive, if you aren’t in a rush then I’d definitely recommend them – you can’t go wrong with under $4 for 50 of them – they just might take a few months to get to you. I use pins a lot as well when I am sewing quilting fabric, I find the wonder clips pull on the fabric as its so thin. I tend to use the clips more when I am working on the binding or multiple layers.

Item #8 – Stitch rippers – uhhhhhh these get A LOT of use around these parts. The purple one I have no idea where I got it from but I love it, it’s awesome but its been used so much that it is a little dull and I need a new one. I bought the Tula Pink stitch ripper as a replacement and it makes me all shades of rage-y. It does have a time and place and gets the occasional use but it definitely can’t replace a standard seam ripper.   So if you have a favourite seam ripper, let me know, I’m in the market.

Item #9 – FriXion Pens – these pens weren’t originally designed for fabric but quilters and sewists discovered them and people love them. When you iron on the writing, it disappears which is the appeal for a lot of people. I tend to only use them when it will be an area that you will never see. Apparently when the fabric gets cold the markings will reappear so I would recommend only using where it will be hidden inside a seam. I do love them and they get a lot of use around these parts. They are a pretty good price at staples but a lot of the local fabric shops carry them as well. There is a great write up on them here if you wanted to read more about the disappearing and (possible) reappearing qualities of these pens.

Thanks for reading my ramblings, I hope I answered a few questions for you!

Tania will have some more fun items for you to view in the coming weeks on her blog as well! Quilters love gadgets!

Much Love,

C

 

Uncategorized

Sew Ottawa! Sew-a-long Week 1

Thank you everyone so much for joining us! The response to our little sew-a-long has been incredible and heart warming, we appreciate everyone so much for being here with us.

Here are the important details to note before you get started:

Fabric Requirements: 2 yards of a solid fabric, 2 yards of a coordinating fabric or fabrics (we are using a combination of coordinating solids and prints).

Finished Quilt size: 50.5″

Seam Allowance: Seam allowance for all seams on this quilt will be 1/4″. I like to use a 1/4″ foot on my machine but a piece of painters tape or masking tape put at the 1/4″ mark will work just fine.

If you choose you can do all 16 blocks or stop at 9 or 12 blocks. 9 blocks with sashing would give you a quilt of 38.5″ x 38.5″ and a 12 block quilt would give you a quilt top of 50.5″ x 38.5″. Both would be a lovely size for a lap quilt or baby quilt.

We are so excited to get started with our first block, it’s a very simple but very pretty block that I love. You can do almost anything with it colour wise so don’t be afraid to experiment with your colours and see what you like together.

I have chosen white as my main for this block and then shades of pink and flowers for the accent colours. You will need:

8 x 3.5″ squares of white or another solid

8 x 3.5″ squares of contrasting colours

Finished Block Size: 10.5″ x 10.5″

SO 2-1
The pinks here are part of the Kona Solids Blossom bundle from Mad About Patchwork The florals here are also from MAP  from Rifle Paper from the Menagerie line. The white is a Kona Solid in Snow

Place your solid squares on top of your coloured/patterned pieces and continue with the usual HST construction:

SO 2-2

I like to chain sew when doing something like this – it saves time with lifting your foot, cutting the thread and putting a new piece in – do all 8 blocks down one side, cut the thread, turn it around and do the other side:

 

 

Snip your pieces apart and then using your ruler cut down the middle. Press your seam allowance to the dark side. At this point you should have 16 blocks.

For our pattern we will need each finished block to be 3″ so you may need to trim your blocks slightly, this is called squaring up. Place your ruler with the diagonal line on the centre seam of the block and trim the block down to 3″ Using the diagonal line on your ruler will help with making sure that you take equally from each side:

so-2-6.jpg

Once you have done this for all 16 blocks you will need to layout your pattern:

SO 2-9

You are now going to sew all your pieces together. I like to start with the top row –  sew each row together. When pressing seams I like to press even rows to the right and odd rows to the left so its easy to remember. You want your seams to be going in different directions like this:

SO 2-10

Once you have each row sewn you will want to then sew each row together, making sure to keep everything the right way up.

SO 2-11

Once you have sewn all 4 rows together you will want to press all your seams flat and then you will have your first finished block! Yay!!

Your block should measure 10.5″ x 10.5″.

so-2-12.jpg

Thank you so much for joining us for week 1! Tania from Poppy Monroe Collection and I will be here to answer any questions you may have.

Tania will be doing week 2 next Thursday the 18th.

Once you have completed your block post it to the Sew Ottawa! Facebook page with the hashtag #sewottawa and you will be entered into a draw to win a weekly prize!

 

Uncategorized

Sew Ottawa! Welcome to our Sew-a-long!

Thank you everyone so much for joining us on this sew along, we are so excited to get started and see what you all create!

Tania from Poppy Monroe and I will be here to help you every step of the way so please don’t hesitate to tag us with your questions on facebook or even send us a PM. Jenna-Rae at Fabric Crush has graciously offered to let us use her studio every few weeks to help some of you who would like some in person help. We will let you know dates and times when we have them ready to go.

Stay tuned to our Facebook Page. One of us will be going live to do a live sew along of the block soon!

Today I am just going to post the basic tutorial on how to make a Half Square Triangle Block (HST).There are several different ways to do it but today we are going to be tackling the easiest/most straight forward way and the way we will be using the most.

Step 1:

Cut two contrasting squares. For the purpose of this tutorial I am using 3.5″ squares which is mostly what we will be using in this sew along. For this quilt you will be using a 1/4″ seam allowance on all blocks.

26237926_10155837426305281_1191248598_o

Step 2:

Lay the white (or lighter coloured square if not using white) square on top of the darker square – right sides together – so the sides that you want facing up are going to be sewn together.

26236943_10155837426310281_1439973598_o

Step 3:

Using a ruler and a pencil (I used a Frixion Pen because I had one handy but a pencil will do just fine) you will want to line your ruler up from one tip of the square to the other tip as seen in the below image.

To make sure nothing shifts you can pin the block but stay away from the line as you are going to be sewing on both sides of that line in just a moment.

26237786_10155837426300281_1618384864_o

IMG_2112 copy.jpg

Step 4:

Using your sewing machine you are going to want to sew 1/4″ down either side of the line – shown here in black thread – the line is shown in pink pen so you can see where you are needing to sew.

 

Step 5:

Once you have both sides sewn you are going to cut down the line (shown in pink here)

26513211_10155837426330281_1821363550_o

open up your two sides and voila! you have two HSTs!

Step 6:

Press your seams to the dark side.

Use your ruler and just trim off the little excess tails. If using scissors just cut as close to the block as possible.

26513484_10155837426360281_1994855356_o

Step 7:

Trim off your extra little tails and if necessary make sure the block is square and you are all done. Now just make a dozen more!

26235853_10155837426405281_206295362_o

We will be starting the official Sew Along on the 11th of January but if you want to try your hand at HSTs right now then just make sure you use 3.5″ blocks to start and you will have a head start on the sew along.

Tania and I will be taking turns making blocks – I make two blocks one week and then she makes two blocks the next week. This way, at the end of the sew-a-long we divvy up our blocks and have ‘sister quilts’. Such a fun way to connect with other quilters and sometimes get the same block looking totally different. We have agreed in advance on a colour theme and fabrics though so it should match up pretty nicely!

I promise better photos next week, these crooked photos are making me twitchy

Much love,

C